| Cutting Edge Dimension Information (Dimensions listed for single side) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Length | Height | Thickness | # of Holes | Hole Size | Bolt Size | Bolt Type & Grade | Hole Type | Top to Hole (“) | Edge to Center of (“) | ||
| 1st Hole | 2nd hole | 3rd Hole | |||||||||
| 47 3/4″ | 6″ | 1/2″ | 5 | 11/16″ x 1 1/2″ | 5/8-11 x 2 | Carriage Bolt Grade 5 | Slotted | 1 9/16″ | 3 13/16″ | 6 13/16″ | 23 15/32″ |
| Cutting Edge Dimension Information | ||
|---|---|---|
| Length | 47 3/4″ | |
| Height | 6″ | |
| Thickness | 1/2″ | |
| # of Holes | 5 | |
| Hole Size | 11/16″ x 1 1/2″ | |
| Bolt Size | 5/8-11 x 2 | |
| Bolt Type & Grade | Carriage Bolt Grade 5 | |
| Hole Type | Slotted | |
| Top to Hole (“) | 1 9/16″ | |
| Edge to Center of (“) | ||
| 1st Hole | 3 13/16″ | |
| 2nd hole | 6 13/16″ | |
| 3rd Hole | 23 15/32″ | |
The genuine Western 44567-2 Cutting Edge Kit restores the clean scraping capability of your multi-position v-plow. This heavy-duty 1/2-inch thick steel replacement set is engineered specifically for 9.5-foot commercial blades. Consequently, a fresh edge protects your expensive steel moldboard base angle from permanent pavement friction wear. Replacing a rounded or thin scraping blade ensures clean, one-pass pavement clearing down to the asphalt surface.
This vehicle-side commercial kit is manufactured from premium high-carbon 10B21 steel for exceptional abrasion resistance. Because this heavy-duty material withstands extreme impact forces, it handles hidden frozen curbs and manhole edges smoothly. Furthermore, the comprehensive factory layout ships complete with both structural side blades, matching center edges, and high-tensile hardware. Therefore, your shop mechanics can complete a rapid full overhaul before winter blizzards arrive.
Superior Abrasion Durability with the Western 44567-2 Kit
Upgrading your commercial plow setup with an original factory wear edge maintains maximum municipal clearing efficiency. This matched set features precise factory-slotted mounting holes that align perfectly with your original moldboard framework. Furthermore, using genuine hardware avoids structural binding or premature bolt shearing under heavy snow stack pressure. As a result, you minimize your commercial route downtime and protect your primary machinery investment over long night clearing shifts.
-
Formulated specifically as a direct fit for 9’6″ Western MVP Plus and MVP 3 commercial v-plow models.
-
Manufactured with a heavy-duty 1/2-inch thickness and 6-inch height to maximize service operational lifespan.
-
Premium high-carbon steel composition delivers superior scraping capability through heavy, compacted sub-zero slush.
-
Complete package includes the driver side blade, passenger side blade, v-plow center cutting edges, and carriage bolts.
-
Serves as a direct OEM replacement for older factory part number 44567 and matches Fisher 44744-2.
Additional Info and Common Related Parts
| Part Number | Item Name | Technical Role |
| 41810-1 | 10″ Rubber Deflector Kit | Forces curling rollback snow spray downward and away from your cab windshield view. |
| 43885 | Cast Curb Guard Kit | Shields the outer corners of your new scraping edges from abrasive concrete curb impacts. |
| 29675-1 | 1/2″ Center Edge Kit | Supplies the standalone middle replacement segments used between the primary blade wings. |
| 49326 | Dielectric Grease | Seals and shields under-hood electrical harness terminal ports against corrosive winter moisture. |
Always refer to your Western Plow’s documentation and vehicle-specific installation instructions to confirm compatibility and proper installation procedures.
Reviews
There are no reviews yet