The genuine Western 49532 Hydraulic Hose serves as a high-pressure fluid line engineered to route hydraulic oil from the central manifold block straight to the angling cylinders. Measuring 3/8 inches in diameter and 36 inches in length, this heavy-duty wire-braided line is outfitted with factory-crimped Female JIC (FJIC) threaded swivel fittings on both ends. Consequently, commercial fleet mechanics install this authentic replacement line to swap out weather-checked, blistered, or weeping hoses before severe winter blizzards demand continuous clearing shifts.
This original manufacturer-grade hose assembly handles intense pressure spikes and constant structural manipulation as the plow blade sweeps left and right. The integration of precision-machined FJIC ends ensures a reliable mechanical seal that stops oil leakage and blocks air from infiltrating the hydraulic circuit. Choosing an original factory replacement eliminates the risk of sudden line blowouts and internal fluid flow restrictions common with low-grade aftermarket alternatives.
For professional plow contractors and shop technicians, checking and replacing stiff or aging high-pressure lines during pre-season maintenance prevents sudden roadside breakdowns during high-priority commercial clearing shifts. By maintaining a clean hydraulic circuit with this original factory component, you preserve optimal pump output and keep your straight-blade plow responding instantly to in-cab controller commands.
Benefits of the Western 49532 Hose Kit
-
Genuine OEM Quality: Sized and threaded precisely for Western Pro Plus, Pro Plow, and Midweight straight-blade plows to ensure exact routing clearance.
-
High-Pressure Steel Reinforcement: Steel-reinforced internal wire braiding provides superior burst protection under extreme structural loads.
-
Leak-Free FJIC Swivels: Female JIC threaded ends simplify installation and tighten securely to completely eliminate fluid leakage.
-
Weather-Resistant Cover: Premium synthetic rubber formulation resists ozone degradation, sub-zero thermal cracking, and continuous road salt exposure.
-
Maintains True Line Pressure: Prevents fluid restriction and eliminates cylinder lag, ensuring instantaneous blade response.
Additional Info and Common Related Parts
| Part Number | Item Name | Technical Role |
| 49330 | Hydraulic Fluid (Gallon) | Premium low-temperature oil required for maintaining optimal system pressure and lift response. |
| 41094 | Lift Cylinder Hose 1/4″ x 18″ | High-pressure factory lift cylinder line routes hydraulic fluid cleanly to handle vertical blade adjustments. |
| 49326 | Dielectric Grease (2 oz) | Recommended compound applied inside electrical terminal pins to block winter road salt and seal out moisture. |
| 26694 | 45-Degree Elbow Fitting | Heavy-duty hydraulic elbow connector used to orient hose lines safely away from pinching frames. |
Always refer to your Western Plow’s documentation and vehicle-specific installation instructions to confirm compatibility and proper installation procedures.
Easy install
They were also the correct parts.
Great products best prices.
Good
Parts in stock that’s a good thing