To order parts, click on the the part number in the table below the diagram. All linked parts are available. Certain components may only be available in a kit and not individually.
|
Auger Assembly |
|||||||
|
Item |
Part |
Qty |
Description |
Item |
Part |
Qty |
Description |
|
1 |
4 |
1/4‑20 x 3/4 Serrated Flange Hex Cap Screw SS |
14 |
4 |
1/2‑13 x 1 Serrated Flange Hex Cap Screw |
||
|
2 |
1 |
5/16‑18 Hex Locknut GB |
15 |
1 |
Auger Drive Frame |
||
|
3 |
1 |
5/16‑18 x 3/8 Set Screw |
16 |
1 |
Auger Drive Motor |
||
|
4 |
88266 |
2 |
#10‑32 Hex Locknut |
17 |
1 |
Auger |
|
|
5 |
2 |
#10‑32 x 2 Hex Cap Screw SS |
18 |
51090 |
1 |
Transmission 30:1 |
|
| 6 | 90313 |
1 |
5/16 Flat Washer |
19 |
8 |
3/8‑16 Serrated Flange Nut |
|
|
7 |
68494 |
2 |
5/16‑18 x 1 Hex Cap Screw G5 |
20 |
1 |
Spinner Motor Connector |
|
|
8 |
51039 |
1 |
#10‑32 x 5/8 Serrated Flange Hex Cap Screw w/Patch |
21 |
1 |
Lower Rail Mount Bracket, Right |
|
|
9 |
51040 |
1 |
3″ 12V DC Motor w/2‑Pin Connector |
22 |
1 |
Lower Rail Mount Bracket, Left |
|
|
10 |
1 |
Motor Drive Coupler |
23 |
1 |
1/2 NPT Nut Black Nylon | ||
|
11 |
1 |
5/8 Bearing 4‑Bolt Flange |
24 |
1 |
Label – Warning, Read Manual |
||
|
12 |
6 |
1/4 x 3/4 x 1/2 Push Retainer |
25* |
1 |
Auger Tube Restrictor Kit |
||
|
13 |
1 |
3/8 Wire Clamp |
26 |
1 |
Label – Warning, Rotating Auger |
||
|
|
|
|
27 |
1 |
Label – Warning, Rear Camera | ||
|
Item 25* |
|
51107 Auger Tube Restrictor Kit |
|
|
|||
| 1 |
4 |
1/4‑20 x 3/4 Serrated Flange Hex Cap Screw SS |
30 |
|
1 |
Material Baffle |
|
|
2 |
91332 |
2 |
5/16‑18 Hex Locknut GB |
31 |
|
1 |
End Cap, Auger Tube |
|
6 |
2 |
5/16 Flat Washer |
32 |
|
1 |
Edge Grip Seal, 36″ |
|
|
7 |
2 |
5/16‑18 x 1 Hex Cap Screw G5 |
33 |
|
1 |
1‑1/4″ Adhesive-Back Foam, 18″ |
|
|
28 |
|
1 |
Auger Tube |
34 |
4 |
1/4 Flat Washer SS |
|
|
29 |
|
1 |
Gate Slide, Auger Tube |
35 |
4 |
1/4‑20 Hex Locknut Waxed SS |
|
|
|
|
|
|
36 |
|
1 |
1/4‑20 Wing Nut SS |
|
|
|
SS = Stainless Steel |
|
G = Grade |
|||