| Cutting Edge Dimension Information (Dimensions listed for single side) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Length | Height | Thickness | # of Holes | Hole Size | Bolt Size | Bolt Type & Grade | Hole Type | Top to Hole (“) | Edge to Center of (“) | ||
| 1st Hole | 2nd hole | 3rd Hole | |||||||||
| 40 3/4″ | 6″ | 3/8″ | 5 | 11/16″ x 1 1/2″ | 5/8-11 x 2 | Carriage Bolt Grade 5 | Slotted | 1 9/16″ | 3 13/16″ | 6 13/16″ | 20 15/32″ |
| Cutting Edge Dimension Information | ||
|---|---|---|
| Length | 40 3/4″ | |
| Height | 6″ | |
| Thickness | 3/8″ | |
| # of Holes | 5 | |
| Hole Size | 11/16″ x 1 1/2″ | |
| Bolt Size | 5/8-11 x 2 | |
| Bolt Type & Grade | Carriage Bolt Grade 5 | |
| Hole Type | Slotted | |
| Top to Hole (“) | 1 9/16″ | |
| Edge to Center of (“) | ||
| 1st Hole | 3 13/16″ | |
| 2nd hole | 6 13/16″ | |
| 3rd Hole | 20 15/32″ | |
The genuine Western 44564-2 Cutting Edge Kit delivers extreme wear resistance and exceptional scraping clarity for multi-position commercial operations. Engineered as a model-specific factory configuration, this matched steel wear strip set fits 8-foot-6-inch commercial v-blades perfectly. Consequently, replacing unevenly thinned or rolling edge segments blocks unnecessary stress from bending your primary base framework. It forces the assembly to clean cleanly down to the blacktop on every pass.
This fleet-grade cutting edge set is manufactured from high-carbon structural steel to handle severe sub-zero impacts without cracking or chipping. Because the dense composition glides cleanly over uneven expansion joints, concrete manholes, and hidden frozen curbs, it keeps your equipment working efficiently during long overnight shifts. Furthermore, utilizing authentic original components guarantees that the pre-slotted bolt hole geometry aligns flawlessly with your moldboard framework. This completely eliminates custom modifications or shop drilling delays during routine fleet overhauls.
Our warehouse packages this genuine factory service assembly as a comprehensive multi-piece upfit package. The master box houses both primary wing scraping edges, the specialized center overlapping v-plow edge kit parts, and a high-tensile mounting bolt bag. This kit features a standard 3/8-inch thickness and carries the durability needed to plow clear pathways through the most punishing winter weather.
Benefits of the Western 44564-2 Edge Kit
-
Engineered as a direct factory replacement fit for 8’6″ Western MVP Plus and MVP 3 commercial v-plows.
-
Premium high-carbon steel composition provides exceptional abrasion lifespan against coarse asphalt and packed ice surfaces.
-
Factory-slotted mounting holes ensure immediate structural alignment to prevent hardware shearing under heavy snow pressure.
-
Arrives complete with the driver and passenger wing sections, matching center sections, and grade 5 mounting fasteners.
-
Supersedes and interchanges cleanly with older legacy factory part numbers 44564 and 44564-1.
Additional Info and Common Related Parts
| Part Number | Item Name | Technical Role |
| 43885 | Cast Curb Guard Kit | Shields the outer edges of your new steel cutting edge from destructive concrete curb impacts. |
| 43088 | V-Plow Shoe Kit | Carries the mechanical weight of the blade to stabilize scraping clearance heights on gravel lots. |
| 41810-1 | 8.5′ Rubber Deflector Kit | Blocks deep rolling slush from blowing upward and obstructing your truck cab windshield view. |
| 49330 | Hydraulic Fluid (Gallon) | Premium low-temperature oil required for periodic hydraulic pump flushes and clear cylinder motion. |
Always refer to your Western Plow’s documentation and vehicle-specific installation instructions to confirm compatibility and proper installation procedures.
Reviews
There are no reviews yet